Rizoma 28.6mm clamp for tapered bars, black, 60/65mm  -  £131.00

Description

For bikes originally fitted with handlebar clamps bolted through the top yoke, these Rizoma billet aluminium adapters allow X-bar (28.6mm) handlebars to be fitted. These adapters have an inbuilt height of 42mm (AZ402B) or 60mm (AZ403B). Additionally a 5mm spacer is included which may be required and would change to the height to 47/65mm.
These clamps are offset, so cen be used to move the bars 5mm forward or rearward of the centre line of the handlebar clamps.
These are universal fit parts, for use when the original handlebar clamp is bolted through the top yoke with either an M10 or M12 bolt.
Please review the dimensions pictured. When choosing X-Bar handlebars to use with the adapters please refer to the handlebar dimensions to select the handlebars giving the best fit on your bike. Note the new handlebar height measurment is from the top yoke deck to the centre line of the handlebars, and forn/rear offset is from the cntre line of the handlebar clamp. Any rise or offset is relative to the fitment position on the top yoke, not the position of the standard bars on the bike.
Please take care to ensure sufficient clearance, particularly to tank and fairing, when fitting to ensure that steering and control of the bike is not compromised. If you are unsure please ask for advice, or have the part checked and fitted by a suitably qualified fitter.